PRODUCTS
V12F SE
V12F SE
+
  • V12F SE
  • V12F SE

V12F SE

  • Commodity name: V12F SE

Classification:

Product Advisory:

  • Details
  • Technicadata:

    Design:4.5-way vented-box

    Frequency Response:22Hz-40kHz(±3dB)

    Sensitivity (2.83V/1m):88dB

    Impedance:8 ohms(minimum 6.4 ohms)

    Power Requirement:50-350W recommended

    Tweeter-1:Model:G2Si. Purified aluminum ribbon tweeter, the size of aluminum ribbon

                           (LWT): 60mm×8.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.

    Tweeter-2:Model:AST2560. Aero striction tweeter, the size of diaphragm (WL):25mm×60mm,

                            easily field-replaceable for the diaphragm.

    Tweeter-3(Rear Firing Tweeter):Model:G2Si. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT):60mm×8.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.

    Midrange:Model:AC165/DC50SC-Y25-0604A, 1×165mm (6.5″). Aluminum frame, sandwich cone of carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire,the special magnet system with Faraday ring and demodulation coil, 120mm×20mm and 80mm×15mm Y25 Ferrite magnet.

    Woofer:Model:AC300/DC75C2C-1204A1, 1×300mm (12″). Aluminum frame, sandwich cone of carbon fiber, copper clad aluminum voice coil with flat wire,the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.

    Crossover Frequency:170Hz, 1.8kHz, 3kHz and 9kHz.

    Crossover’s Attenuation Slope:Woofer -12dB,Midwoofer -12dB,Tweeter:T1 -12dB,T2 -12dB, T3(Rear firing tweeter) -12dB.

    Crossover Components:High quality MKP capacitors and high purified OFC inductors and the metal oxide film resistors with military industrial standard.

    Connective Cable:Teflon insulated OCC cable

    Damping Material:High quality wool, the polyester fiber and the PU foam.

    Connections:4 pcs 18mm gold-plated copper connector, Bi-wiring

    Cabinet Material:High quality MDF

    FinishThe standard finish is rosewood PE high gloss paint. Furthermore, there are also Cherry PE high gloss paint and black piano paint for options.

    Dimensions (HWD)1115mm×398mm×557mm (43.90″×15.70″×21.93″).

    Net Weight:73kgs/pc(160.94lb/pc)

Key words:

Product inquiry