 |
Technical data:
- Design£º3-way vented-box
- Frequency Response£º37Hz-40kHz
- Sensitivity (2.83V/1m)£º89dB
- Impedance£º8 ohms (minimum 6.4 ohms)
- Power Requirement£º50-200W recommended
- Tweeter£ºPurified aluminum ribbon tweeter, the size of aluminum ribbon (LWT): 110mm¡Á14.5mm¡Á0.015mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
- Midrange: 1¡Á165mm (6.5¡å). Aluminum frame, the sandwich cone of Non- woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2¡å) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm¡Á20mm Y30 Ferrite magnet.
- Woofer£º2¡Á180mm (7¡å). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2¡å) copper clad aluminum voice coil with flat wire£¬the special magnet system with Faraday ring and demodulation coil, 170mm¡Á22mm Y30 Ferrite magnet.
- Crossover Frequency£º150Hz and 1900Hz
- Crossover¡¯s Attenuation Slope£ºWoofer -12dB, Midrange -12dB, Tweeter -18dB
- Crossover Components£ºM-Cap Supreme MKP capacitors are used for crossover oftweeter, Aurum Cantus MKP capacitors and nonpolarity electrolytic capacitors are used for the crossover of midrange and woofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
- Connective Cable£ºTeflon insulated OCC cable
- Damping Material£ºThe polyester fiber, PU foam and PE bubbles
- Connections£º4 pcs 18mm gold-plated copper connectors, Bi-wiring
- Cabinet Material£ºHigh quality MDF
- Finish: The standard finish is Rosewood PE high gloss paint. Furthermore, there are also Figured maple PE high gloss paint, Cherry PE high gloss paint and the Black PE high gloss paint for options.
- Dimensions (HWD)£º1080mm¡Á326mm¡Á444mm (42.52¡å¡Á12.83¡å¡Á17.48¡å).
- Net Weight£º45kgs/pc (99.20lb/pc)
|
download
About Us | Site
Map | Contact Us | ICP 05000041 | ©2007 Jinlang Audio Co., Ltd. ¡¡¡¡Powerby www.hifi-china.com