 |
Technical data:
- Design£º3-way vented-box
- Frequency Response£º32Hz-40kHz
- Sensitivity (2.83V/1m)£º90dB
- Impedance£º8 ohms (minimum 6.4 ohms)
- Power Requirement£º50-200W recommended
- Tweeter£ºModel£ºG3i. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT)£º100mm¡Á8.5mm¡Á0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
- Midrange: Model£ºAC120/50CK, 1¡Á120mm (4.8¡å). Aluminum frame, the composite cone of Non-woven carbon fiber and Kevlar, 50mm (2¡å) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm¡Á20mm Y30 Ferrite magnet.
- Woofer£ºModel£ºAC200/50C2C, 1¡Á200mm (8¡å). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2¡å) copper clad aluminum voice coil with flat wire£¬the special magnet system with Faraday ring and demodulation coil,120mm¡Á20mm Y30 Ferrite magnet.
- Crossover Frequency£º200Hz and 2300Hz
- Crossover¡¯s Attenuation Slope£ºWoofer -12dB, Midrange -6dB, Tweeter -18dB
- Crossover Components£ºM-Cap Supreme MKP capacitors are used for crossover of tweeter, Aurum Cantus MKP capacitors and nonpolarity electrolytic capacitorsare used for the crossover of midrange and woofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
- Connective Cable£ºTeflon insulated OCC cable
- Damping Material£ºThe polyester fiber and the PU foam
- Connections£º4 pcs 18mm gold-plated copper connectors, Bi-wiring
- Cabinet Material£ºHigh quality MDF
- Standard Finish£ºCherry PU matt paint, Figured maple PU matt paint and Rosewood PU matt paint and
- Special Finish£ºCherry PE high gloss paint, Figured maple PE high gloss paint and RosewoodPE high gloss paint
- Dimensions (HWD)£º1100mm¡Á254mm¡Á352mm (43.31¡å¡Á10¡å¡Á13.86¡å).
- Net Weight£º38.5kgs/pc (84.88lb/pc)
- Gross Weight£º102kgs/pair (224.87lb/pair)
- Shipping Volume£º0.486m3/pair
|
download